Pengaruh Variasi Serat Fiberglass Terhadap  Kekuatan Tarik Komposit High Density Polyethylene

Jhenris Ivanly; M Dalil; Dodi Sofyan  Arief

doi:10.31258/proksima.1.1.1-7

Penulis

Jhenris Ivanly Universitas Riau
M Dalil Universitas Riau
Dodi Sofyan Arief Universitas Riau

DOI:

https://doi.org/10.31258/proksima.1.1.1-7

Kata Kunci:

High Density Polyethylene, Fiber Glass, Tensile Test

Abstrak

This research was aimed to determine the effect of fiberglass fibers in increasing the tensile strength of HDPE composites and their advantages over PVC materials. The specimens were printed using a hot press by pressing and heating at a temperature of 140°C, mixing the materials was carried out by mixing in a measuring cup, then cutting was carried out for tensile testing with the ASTM D3039 standard on the specimen. The results of the study obtained tensile strength with a fraction of 70% vol HDPE resin, 30% vol fiber fiberglass average of 13.774 Mpa with short fiber type and fraction 75% vol HDPE resin, 25% vol fiber fiberglass average of 24,334 Mpa for this type of fiber the length and tensile strength of PVC material has a value of 7 25 Mpa, the tensile strength of HDPE fiberglass composite of 24,334 Mpa is sufficient to replace PVC.

Unduhan

Data unduhan belum tersedia.

Referensi

Aditya Wahyu P. 2014 Pengaruh Variasi Panjang Serat Dan Variasi Fraksi Volume Terhadap Kekuatan Mekanik Material Komposit Polyester Dengan Penguat Serat Daun Nanas. Universitas Jember.

Diharjo, K., dan Triyono, T., (2000). Buku Pegangan Material Teknik. Universitas Sebelas Maret, Surakarta.

Gagani Abedin I dkk. 2019. “The Effect of Temperature and Water Immersion on The Interlaminar Shear Fatigue of Glass Fiber Epoxy Composites Usng The I-beam Method”. Composites Science and Technology. 181, 107703.

Hwang Daekyun, Donghwan Cho, 2019, “Fiber Aspect Ratio Effect on Mechanical and Thermal Properties of Carbon Fiber/ABS Composites via Extrusion and Long Fiber Thermoplastic Processes”, Journal of Industrial and Engineering Chemistry 80, pp. 335-344.

Ichsan, Rusman Nur dan Irfa’i, Moch Arif. (2015). Pengaruh Susunan Lamina Komposit Berpenguat Serat E-Glass dan Serat Carbon Terhadap Kekuatan Tarik Dengan Matriks Polyester. Jurusan Teknik Mesin, Fakultas Teknik, Universitas Negeri Surabaya.

Kurkin E.I., V.O.Sadykova, 2017, “Application of Short Fiber Reinforced Composite Materials Multilevel Model for Design of Ultra-light Aerospace Structures”, Procedia Engineering 185, pp. 182-189.

Kriatianto laurensius. 2018. Pengaruh Persentase Serat Fiberglass Terhadap Kekuatan Tarik Komposit Matriks Polimer Polyester. Universitas Sanata Dharma Yogyakarta. Yogyakarta.

Kardos J.L., 1985, “Critical issues in Achieving Desirable Mechanical Properties for Short Fiber Composites”, Pure & Application Chemical, Vol. 57, No. 11, pp. 1651-1657.

Kismono Hadi, Bambang. (2000). Mekanika Struktur Komposit, November

Mallick P.K., 2010, “Thermoplastics and Thermoplastic-matrix Composites for Lightweight Automotive Structures”, Material, Design and Manufacturing for Lightweight Vehicles, Woodhead Publishing Series in Composites Science and Engineering, pages 174-207.

Pei Shenli, Kaifeng Wang, Jingjing Li, Yang Li, Danielle Zeng, Xuming Su, Xianghui Xiao, Hui Yang, 2019, “Mechanical Properties Prediction of injection Molded Short/Long Carbon Fiber Reinfornced Polymer Composites using Micro-X-Ray Computed Tomography”, Composits: Part A.

Schwartz, M.M. (1984). Composite Materials Handbook. Mc. Graw-Hill Inc New York.

Setiawan, Andi Tri, dkk. (2019). “Analisa Sifat Mekanik Komposit Serat Gelas Pada Lapisan Yang Berbeda”. ENTHALPY: Jurnal Ilmiah Mahasiswa Teknik Mesin. Vol. 4, Hal 47-52.

Sulistioso G. S., D. Ramadhani, M. Christina, N.Marnada. 2012. Pengaruh Radiasi Gamma terhadap sifat HDPE untuk Tibial tray. Jurnal Ilmiah Aplikasi Isotop dan Radiasi. 8 (2)

Van Vlack, L. H. (1994), terjemahan Japrie. S. Ilmu dan Teknologi Bahan. Edisi kelima, Erlangga, Jakarta.

Widjarnako, Emanuel Mario. (2017). Karakteristik Kekuatan Komposit Serat Kulit Pohon Sonokeling Dengan Variaisi Jumlah Lapisan Serat Pada Matriks Polyester. FST. Universitas Sanata Dharma.