Kinematic Analysis of the Draglink Mechanism Using the Newton Rhapson Iteration Method

Nazaruddin Nazaruddin; Fablil Huda; Ryan Syuhada

doi:10.31258/proksima.v2i1.21

Penulis

Nazaruddin Nazaruddin Universitas Riau
Fablil Huda Universitas Riau https://orcid.org/0000-0003-2516-9163
Ryan Syuhada Universitas Riau

DOI:

https://doi.org/10.31258/proksima.v2i1.21

Kata Kunci:

Optimasi, Tegangan lentur, Deformasi Pegas, Energi potensial, hukum hooke

Abstrak

Position, speed, and acceleration analysis are all included in kinematic analysis. Vectors of location, velocity, and acceleration can be expressed analytically in the form of complex numbers using the Newton Rhapson Iteration Method. The location vector of the point to be investigated must be found first, and then the acceleration and velocity vectors must be found by differentiating against time. This study analyzes the relationship between the θ1 value and the θ2, θ3, θ4, θ5, and x2 values in a drag-link mechanism. The Newton-Raphson iteration method is employed for kinematic analysis to solve nonlinear equations. In this research, the analysis results indicate a correlation between the θ1 value and the θ2, θ3, θ4, θ5, and x2 values. As θ1 increases, the θ2, θ3, θ4, and θ5 values also proportionally increase. The x2 value is also influenced by changes in θ1. This study combines the Newton-Raphson iteration method with graphical analysis using CAD software. The conclusion of this research highlights a significant relationship between the θ1 value and the θ2, θ3, θ4, θ5, and x2 values in the drag-link mechanism. The analysis provides valuable insights for modeling, designing, or controlling systems involving these variables.

Unduhan

Data unduhan belum tersedia.

Referensi

Y. Saputra and R. Muharni, “Perancangan dan Analisis Kinematik Dengan Metode Grafis dan Bilangan Kompleks Dari Alat Peraga Engkol Peluncur,” TEKNOSAINS J. Sains, Teknol. dan Inform., vol. 9, no. 1, pp. 9–19, 2022.

N. Nazaruddin and W. Fatra, “Analisis Kinematika pada Quick Return Mechanism dengan Menggunakan Metode Bilangan Kompleks,” Proksima, vol. 1, no. 1, pp. 18–24.

D. Wardianto, I. Anwar, and M. Muchlisinalahuddin, “Aplikasi Kinematika Pada Mekanisme Lengan Penanam Alat Tanam Padi Semi Mekanis,” Menara Ilmu, vol. 15, no. 2, 2021.

G. Mustofa, S. Tangkuman, and H. Luntungan, “Simulasi Kinematika Mekanisme Lengan Backhoe Excavator,” J. POROS Tek. MESIN UNSRAT, vol. 7, no. 1, 2018.

D. Yulianto and S. T. Wijianto, “Analisis Kinematis Lengan Excavator Keihatsu 921 C.” Universitas MUhammadiyah Surakarta, 2014.

A. Sugihartoa, A. I. Mahyuddina, I. Hermana, and M. N. H. Kusumab, “Pengukuran dan Pemodelan Sistem Kinematika 8 Batang sebagai Parameter Kinematika pada Atlet Rowing.”